3 Common Commercial Irrigation System Problems

3/1/2022 (Permalink)

When the head of an irrigation system is obstructed it might be due to the head being clogged.

Commercial Irrigation System Problems

Is your building in East Naples, FL, experiencing irrigation problems? There are usually only a few common troubles that affect a standard irrigation system, and the fixes are usually simple ones.

1. Clogged or Obstructed Heads

The most common and simplest issue is a clogged head. The cause is any number of things: foot traffic, lawn care equipment and workers, pets or wild animals, or simply just weather and erosion. To start, check all of your system's heads to see if any are clogged with dirt or crooked. Gently clean any dirt or other debris such as leaves away from the heads. If any are crooked, gently straighten them. This fix helps to clear up any uneven pressure or individual heads that weren't working.

2. Excess or Inadequate Flow

Whether it's too much or not enough water, both aren't good for the health of your lawn. Before doing anything, check your irrigation system controller and be sure that it has been properly adjusted. It might be helpful to check your owner's manual or call the installer if you aren't sure how to operate your system. Next, determine if the flow is uneven across the lawn or if it's concentrated into one area. From this, you can tell if it's a valve issue or a head issue.

3. Leaking Valves or Pipes

As the seasons change, your system needs a lot of maintenance. Along with adjusting your flow from the controller box, you should also be checking for any leaking valves or pipes. If you have already found a leaky pipe or if you've had a sudden burst, it's best to call in a water damage cleanup and restoration specialist. These experts are equipped with special tech to make cleanup a cinch.
Troubleshooting an irrigation system is simple once you know the common problems and have the reassurance of a professional in case things go wrong.